Futaba 4PKS-R 2.4GHz - Manual (Page 78)

78
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
"OAT
Steering side EPA function, STEXP function, STSPD function, or D/R function setting
also affects channel 3 side operation. However, the channel 3 servo is not reversed by
setting the steering side reverse function.
Effect of set value of other functions on tilt mixing
Shutting off brake side operation
When brake side operation is unnecessary with a boat, etc., it can be shut off.
Tilt mixing
Tilt mixing uses an outboard engine and applies bidirectional mixing from rudder
(steering) to channel 3 and from channel 3 to rudder so that with a boat, rudder opera-
tion and tilt mixing operation can be performed by 2 servos.
Tilt mixing can be performed by rudder operation, by steering wheel and 3rd channel.
Brake side operation (TRG-BRK)
"RAKE
4ILT
1
3HUTTING
3ELECT
./2-!, .ORMAL
#54 4RIGGER
2
When ending setting, return to the initial screen by pressing
THE
Prohibiting brake side operation
"OAT
(Steering, Throttle system)
Adjustment buttons
MAKE
Setup item selection
DOWN
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
SETUP