Futaba 4PKS-R 2.4GHz - Manual (Page 21)

DL1
DL2
DL3
DT1
DT2
DT3
21
B
e
for
e
Using
Grip Vibrator
A vibrator is built into the grip of the T4PKSR. The vibrator vibrates at racing timer lap
navigation, time-up, and low battery alarm. (p.130)
Total timer display (H:M)
Battery voltage display
Steering trim display
Throttle trim display
User name display
When the (END) button is held down for 1 second or longer at the initial screen, the
Futaba logo and user name are displayed for about 2 seconds.
Edit button lock display
Trim/dial lock display
Power switch turned on
%HHSFRQ¿UPDWLRQVRXQGLVJHQHUDWHGDQGWKH
initial screen shown below appears.
Display when power switch is turned on
Function names and rate as-
signed to dials are displayed.
D i s p l a y m o d e c a n b e
changed by using the SYS-
TEM function. (See pge 108)
Model name (10 characters)
*The current servo mode (servo
response) is displayed.
The mode currently operating is
displayed. ("HIGH"/"NOR")
" B L H T " i s d i s p l aye d w h e n
backlighting is ON.
When radio waves are being emit-
ted, "RF" is displayed. When radio
waves are not being emitted when
turned on by display switch and
when the DSC function is used,
"DISP" is displayed. *The current receiver type is
displayed.
The type currently operating is
displayed.
("C1"/"C2")
Power supply and voltage display
Dry cell batteries (alkali batteries are recommended) can be used with the optional bat-
tery box. However, when using dry cell batteries, set BATT-TYPE in the system menu
to DRY 4CELL. When BATT-TYPE is set to DRY 4CELL, the voltage display of the
initial screen will change to the
symbol.
When using the T4PKSR standard HT5F1700B battery, always set BATT-TYP to
NiMH5 LiFe2. (See page 110, for a detailed description of the battery types.)