Data transfer "dttrn, Fu n c tio n, Data is not interchangeable with t4pk – Futaba 4PKS-R 2.4GHz User Manual
Page 126: Cover
![background image](/manuals/676277/126/background.png)
Connect the communication
port of both T4PKSR with
the optional DSC cord.
Communication port (interior
left side)
Cover
DSC cord for T4PKSR (option)
126
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t
he
button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he
button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
(Preparation)
- Connect the communication port of both transmitters with the
optional DSC cord.
1
Set the power switch of both transmitters to the display (DISP
ON) side.
Use the (JOG) button and (+) button to display the "DT-TRN"
at both transmitter.
Using the Data Transfer function
When the "DT-TRN" menu
is selected when the trans-
mitter power switch is at
the transmit (PWR ON)
side, the message shown
below prompting you to set
the switch to the display
side is displayed.
Data transfer side
Data receive side
Transmitter type
(Data receive side)
Data Transfer "DTTRN"
This function copies the model memory data of one T4PKSR to another T4PKSR. Data
H[FKDQJHZLWKD73.6XSHULVDOVRSRVVLEOHEXWIXQFWLRQVQRWSURYLGHGDWWKH73.6X-
per are not copied. Connect the communication port of both T4PKSR with the optional
DSC cord. Use with this function with the T4PKSR power switch at the display side.
Data Transfer "DTTRN"
s3ELECT
button
* blinks at the current setup item.
Data is not interchangeable with T4PK.