Futaba 4PKS-R 2.4GHz - Manual (Page 56)

56
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
SETUP
Wheel operation
Mild
(Negative side) Quick
(Positive side)
Wheel operation
Ser
v
o
tr
a
v
el
WITH
3TEERING
3TEERING
(Steering system)
This function is used to change the sensitivity of the steering servo around the neutral
position. It has no effect on the maximum servo travel.
1
7HEN
BUTTON
2
7HEN
THE
Steering EXP adjustment
When the setting is not determined, or the characteristics of the model are unknown,
start with 0%. (When EXP is set to 0%, servo movement is linear.)
Racers Tip
The steering EXP adjustment (RATE)
can be controlled with digital dial
DL1, DL2, DL3 or digital trim DT3
etc. with the function select dial func-
tion. (p.90)
Dial / Trim Setting
Adjustment range
Adjust button
TONS
PRESSING
Setup item
2!4%