Futaba 4PKS-R 2.4GHz - Manual (Page 68)

Setup items
0234
-/$%
Setup item selection
DOWN
68
Fu
n
c
tio
n
0REPARATION
OPERATION
1
0RESET
3ELECT
"
.EUTRAL
&
2
When ending setting, return to the initial screen by pressing
THE
Engine Cut function adjustment
The throttle servo operating position (preset position) set by this setting is unrelated to
the setting of other functions. Maximum to minimum servo travel can be set. However,
the reverse function setting is enabled.
Servo Throw
When "CUT OFF", which prohibits trigger brake side operation, is set in the boat mode
(p.78), "TH-BRK" (brake side) of the EPA functions (p.49) cannot be adjusted. The
preset position set here becomes the linkage standard. Connect the linkage so that the
carburetor is fully closed and the engine is cut off in the preset adjustment range and
set the full throttle position by EPA function "TH-FWD". Adjust the idling position by
throttle trim.
When TRG-BRK is set to CUT OFF by boat mode function
3TART
 Caution
￸
7HILE
Adjust button
TONS
PRESSING
Preset position (PRST)
Setup item selection
DOWN