Futaba 4PKS-R 2.4GHz - Manual (Page 32)

Installation Safety Precautions
 Warning
32
In
stal
lation
Receiver (receiver antenna)
Receiver Vibration-proofing / Waterproofing
 Do not cut or bundle the receiver antenna wire.
 Do not bundle the receiver antenna wire together with the motor controller lead wire.
 Keep the receiver antenna wire at least 1cm away from motor, battery, and other wiring carrying heavy current.
 Do not use a metal receiver antenna holder on a plate made of metal, carbon, or other conductive material.
￸ Install the receiver antenna holder as closely as possible to the receiver.
If the antenna wire is cut, bundled, or routed near a noise source, the receiving sensitivity will drop, the running (sailing)
range will decrease, and you may lose control of the model.
1RLVHLVWUDQVPLWWHGWKURXJKPHWDOFDUERQDQGRWKHUFRQGXFWLYHPDWHULDOVRNHHSWKHUHFHLYHUDQWHQQDZLUHDZD\IURPVXFKSDUWV
(Car)
￸ Vibration-proof the receiver by wrapping it in foam rubber or other vibration-absorbing material
and mount it with thick double-sided tape.
￸ When using the receiver holder supplied with the model kit, mount the holder to the chassis
through a rubber grommet.
(Boat)
￸ Vibration-proof the receiver by wrapping it in foam rubber or other vibration-absorbing material.
Also waterproof the receiver by sealing it in a plastic bag.
If the receiver is exposed to strong vibration and shock, it will operate erroneously due to the invasion of water drops and
you may lose control of the model.
Screw
Mechanical plate
Nut (as required)
Receiver holder
Damper
When using the receiver holder sup-
SOLHG ZLWK WKH NLW LQVWDOO WKH UHFHLYHU
WKURXJKDUXEEHUJURPPHW
Foam rubber, etc.
:UDSWKHUHFHLYHULQIRDPUXEEHURURWKHU
YLEUDWLRQDEVRUELQJPDWHULDO'RQRWXVH
KDUG PDWHULDO +DUG PDWHULDO GRHV QRW
KDYHDYLEUDWLRQSURR¿QJHIIHFW
Mechanical plate
Thick double-
sided tape
:KHQ PRXQWLQJ WKH UHFHLYHU ZLWK GRXEOHVLGHG WDSH
do not use a stiff tape. Stiff tape does not have a vibra-
WLRQSURR¿QJHIIHFW
#%
$
Antenna
,QVWDOO WKH UHFHLYHU DV IDU DZD\ DV SRVVLEOH IURP WKH EDW-
WHU\PRWRUFRQWUROOHUPRWRUVLOLFRQFRUGDQGRWKHUQRLVH
VRXUFHV.HHSLWDZD\IURPWKHDQWHQQDZLUHLQSDUWLFXODU
Antenna holder
Install the antenna holder as close as possible to the
UHFHLYHU7KHVXUSOXVDQWHQQDZLUHIURPWKHUHFHLYHU
to the antenna holder is affected by noise. Do not use
DPHWDODQWHQQDKROGHURQDSODWHPDGHRIPHWDOFDU-
ERQRURWKHUFRQGXFWLYHPDWHULDO
Antenna wire does
not touch the plate. Battery