3Com 3C16476CS - Manual (Page 24)

24 C HAPTER 3: C ONNECTING TO THE W EB I NTERFACE
Table 10 lists the available items on the menu.
Table 10 Available Menu Items
Menu Item Description
Device Summary Contains tabs that allow you to:
■ Provide a summary of the Switch’s basic
settings and versions of current
components.
■ Set the polling interval in seconds.
■ Display the description for each color
coded port.
Save Configuration Saves the Switch’s configuration.
Administration Manages the device.
IP Setup Allows you to setup, modify, or view the IP
configuration parameters.
Backup Configuration Allows you to backup the Switch’s
configuration.
Restore Configuration Allows you to restore a saved configuration.
Firmware Upgrade Allows you to upgrade the current firmware
via HTTP.
Initialize Allows you to reset the Switch to factory
default settings.
Reboot Allows you to perform system reboot.
System Access Contains tabs that allow you to:
■ Display user summary information.
■ Create a new user.
■ Modify existing users.
■ Remove existing users.
System Time Allows you to set the system time.
SNMP Contains tabs that allow you to:
■ Display SNMP summary information.
■ Enable or disable SNMP.
■ Add community strings.
■ Remove community strings.
Device Configures the device.
VLAN Contains tabs that allow you to:
■ Create a VLAN.
■ Modify a VLAN.
■ Modify VLAN membership for a port.
■ Rename a VLAN.
■ Remove a VLAN.
■ Display VLAN membership for a port.
■ Display VLAN information.
Spanning Tree Allows you to configure a Spanning Tree
Protocol.
IGMP Snooping Allows you to enable or disable IGMP
snooping.
IGMP Query Allows you to enable or disable IGMP query
mode.
Broadcast Storm Allows you to enable or disable rate
limiting.
Port Configures the ports.
Administration Contains tabs that allow you to:
■ Display selected port information for the
entire Switch.
■ Display individual port information.
■ Modify the port settings.
Menu Item Description