Estes 4603 - Copperhead User Manual

Page 4

Helicopter Flight Modes

ESTE4603 v1.2

Your Copperhead helicopter has two fl ight modes: a basic mode for learning and another for more advanced fl ying. After
you have mastered basic fl ight commands and can comfortably fl y your helicopter in all directions and altitudes, you can
select the “ADVANCED FLIGHT MODE” by pushing the button on the lower right hand of the controller. The helicopter’s
tail rotor will become more responsive to your FORWARD and BACKWARD commands. To return to the basic mode,
simply push the “ADVANCED FLIGHT MODE” button again.

Safety Tips

Troubleshooting

PROBLEM

Controller doesn’t work.

Helicopter does not respond.

PROBLEM

Helicopter does not lift off.

Helicopter lands too fast.

CHECK

1. Controller’s power switch is “OFF”.
2. Controller’s batteries installed improperly.
3. Controller’s batteries depleted.

1. Controller not turned on.
2. Helicopter not turned on.
3. Antenna not extended fully.
4. Helicopter requires charging.
5. Helicopter is not armed.

CHECK

1. Make sure the controller is turned “ON”.
2. Make sure the helicopter is charged.
3. You are trying to fl y in strong or gusty winds.

1. Throttle stick pulled down too quickly.
2. Helicopter isn’t fully charged.

Safety Tips

Spare Parts

Canopy

Tail Rotor Blade

Tail Support

Battery Case

Tail Fins

Motor Frame

Connector Link

Gear A

Landing Gear

Blade Grip Set

Large Ball Bearing

Metal Frame Set

Flybar

Inner Rotor Shaft

Main Blades

Gear B

Small Ball Bearing

Tail Motor Set

PC Box

Motor A

LiPo Battery

Motor B

Tail Motor Set

Controller

USB Charge Cord