Ecler AMIC24I - Manual (Page 91)

91
7. TECHNICAL CHARACTERISTICS
7. CARACTERÍSTICAS TÉCNICAS
7. CARACTÉRISTIQUES TECHNIQUES
7. TECHNISCHE DATEN
Processing:
A/D
& D/A 24 bit, 48kHz
DSP 48 bits
Latency 0.585ms
Input / Output:
2 Inputs / 4 outputs
Input Levels: Nominal / Maximum 0dBV / +12dBV
Input attenuator: Stepless from -84dB to +12dB
Input Impedance: Balanced, 30k 
Output impedance: 300  balanced
CMRR (20Hz - 20kHz): >60dB
Distortion @ 0dBV 20Hz-20kHz: <0.008%
Frequency Response (-0.3dB): 10Hz - 20kHz
Noise from 20Hz to 20kHz: below -105dB
Crosstalk
(20Hz-20kHz): >85dB
Maximum Delay:
910ms (312.5m) total for all 4 channels.
Delay resolution: 20.83µs (7mm)
Compressor / Limiter:
Threshold
from -48dBV to +12dBV
Ratio 1:1 to :1 (limiter)
Attack time Auto or from 0.1ms to 150ms.
Release time Auto or from 1ms to 5s.
High & Low pass Crossover filters
Butterworth in 6/12/18/24dB/oct.
Bessel in 12/18/24dB/oct
Linkwitz-Riley in 12/24dB/oct.
Parametric Eq types (10 max. per output)
-Bypass
-Param. Eq. 20Hz-20kHz; -60/+12dB; Q from =.3 to 200
-Low & High Shelf 6/12 dB/oct
-Low & High Pass 6/12 dB/oct.
-All-Pass 1/2 order
Built In signal generator
-Sine (20Hz to 20kHz)
-Polarity(20Hz to 20kHz)
-White
-Pink
Signal
Mute Yes
Signal Polarity Invert Yes
Analog Volume remote control (0-10VDC)
0V.= no attenuation (0dB) / +10V. = full attenuation (- .)
Connectivity:
USB1.1 (2.0 compatible)
Mains
90-264VAC 47-63Hz
Power consumption 25VA
Dimensions
482.6x44x198mm
Weight 2.25 kg.