Ecler AMIC24I User Manual
Page 12
12
STORE sends the currently edited preset to AMIC24i hardware (to become the automatically
extracted preset from hardware). This is only available if .amiclab2 is connected with the
hardware. During the store process, a progress dialog box is displayed to provide feedback of
the operation progress.
PASSWORD opens a dialog box allowing to change AMIC24i hardware access password. This is
only available if .amiclab2 is connected with the hardware.
You can choose a blank (no character) password if you don't want the program to open this
password dialog box when hardware is connected.
FIRMWARE is used to update AMIC24i firmware (internal code). An Ecler supplied file with "fw"
extension is used to update firmware (visit our web site to download the last version). Executing
this command opens a Windows® typical file selection dialog box.
This is only available if .amiclab2 is not connected with the hardware ("CONNECT" button
deactivated).
If hardware is password protected, a password dialog box opens to type the password and
validate the operation.