Dynaflite GPMA0525 - Manual (Page 4)

These are the building tools and supplies that
you will need to build your Talon. We
recommend Great Planes Pro™ CA and Epoxy
❏
1 oz. Thin CA (GPMR6002)
❏
1 oz. Medium CA+ (GPMR6008)
❏
CA Applicator Tips (HCAR3780)
❏
CA Accelerator (GPMR6035)
❏
30-Minute Pro Epoxy (GPMR6047)
❏
#1 Hobby Knife (HCAR0100)
❏
#11 Blades (Qty. 5 – HCAR0211)
❏
Razor Plane (MASR1510)
❏
Small T-pins (HCAR5100)
❏
Great Planes Plan Protector (GPMR6167)
❏
Electric Drill
❏
Drill Bits: 1/16", 7/64" (or 3/32"), #25 (or
5/32"), 3/16", #12 (or 3/16")
❏
#1 Phillips Screwdriver
❏
Top Flite Covering Iron (TOPR2100)
❏
Hot Sock ™ (for your covering iron,
TOPR2175)
❏
Denatured or Isopropyl Alcohol (for epoxy
clean-up)
❏
HobbyLite ™ Balsa Filler (HCAR3401)
❏
Lead/Acid or Silver Solder (GPMR8070)
❏
Bar Sander or Sanding Block and
Sandpaper (coarse, medium grit)
❏
10-32 Tap
A flat, durable, easy to handle sanding tool is a
necessity for building model airplanes. Great
Planes makes a complete range of Easy-Touch
™
Bar Sanders and replaceable Easy-Touch
Adhesive-backed Sandpaper.
Here’s a complete list of Easy-Touch Bar Sanders
and Adhesive Backed Sandpaper:
5-1/2" Bar Sander (GPMR6169)
11" Bar Sander (GPMR6170)
22" Bar Sander (GPMR6172)
33" Bar Sander (GPMR6174)
44" Bar Sander (GPMR6176)
11" Contour Multi-Sander (GPMR6190)
12' roll of Adhesive-backed 80-grit sandpaper
(GPMR6180)
150-grit (GPMR6183)
220-grit (GPMR6185)
Assortment pack of 5-1/2" strips (GPMR6189)
•When you see the term “test fit” in the
instructions, it means you should first
position the part on the assembly without
using any glue, then slightly modify or
“custom fit” the part as necessary for the
best fit.
•Whenever just “epoxy” is specified you may
use either 30-minute epoxy or 6-minute
epoxy. When 30-minute epoxy is specified,
it is highly recommended that you use only
30-minute (or slower) epoxy because you will
need either the working time and/or the
additional strength.
TYPES OF WOOD
BUILDING NOTES
REQUIRED BUILDING
SUPPLIES AND TOOLS
4