Drawmer DC2476 Digital Mastering Processor - Manual (Page 30)

30
OUTPUT - Page 1
OUTPUT - Page 2
Shows whether the fader is up or
down.
When Pv is selected (using the
Chain/Param button).
Use the Left or Right button to
select either the Level or the Fader
function
Shows G.R applied by the Gain
Management after the 3 band signals
have been summed.
Push the control knob to select
which band is to be adjusted.
Push the control knob to start the
Fade Out/ Fade In.
This shows the current fade level.
Shows the selected fader option. Push the knob to select the required
fader shape.
Adjust band levels for correct spectral
balance and minimum gain reduction.