Drawmer DC2476 Digital Mastering Processor - Manual (Page 20)

20
CONTROL KEYS
The main controls keys are:
The UP key and the DOWN keys which
are used to scroll up or down through the display pages.
The LEFT key and the RIGHT key which are
used to move along either the CHAIN or the PARAMETER function,
depending on which has been selected by the Chain/Param button.
The Control knob is a dual purpose device which is used as a band selector
and also to adjust the parameter values.
The control knob is set so that the Band that needs adjusting is selected by
PUSHING the control knob to the required band. The value is set by
ROTATING the rotary control knob to the required value.
LED DISPLAY
Edited Patch
This is highlighted when the loaded Patch (User or Factory) has been
edited.
Midi Active
This will display only when the midi interface is in use.
Fade
The Fade will indicate that a Fade Up or a Fade Down is in progress. This
is set on the Output Page.
EXT. Clock
This shows that the DC2476 is being controlled from an External Clock
Source.
The External Sample Rate can be monitored by selecting the Misc page on
Global.
High Rate
When this LED is highlighted the Sample Rate is either 96.0K or 88.2K.
Low Rate
Indicates that the Sample Rate is 48.0K, 44.1K or 32.0K.