Chief Manufacturing CTA-100 - Manual (Page 8)

Installation Instructions CTA-100
8
STEP 4
Figure 8. Make Adjustments to Unit
Making Adjustments
1. Install your VCR/DVD into the CTA-100.
2. Adjust the side plates (30) and adjustment plates (40)
as needed to secure your VCR/DVD safely in the
CTA-100. See Figure 8.
3. Tighten all cap screws (60).
WARNING
Failure to install and tighten the screws to secure
your VCR/DVD can result in personal injury and/or
equipment damage.
4. Check the CTA-100 to ensure that the side plates
(30) and adjustment plates (40) are adjusted
correctly. The unit should fit tightly around your
VCR/DVD. If not, repeat steps 2 and 3 until your
VCR/DVD is secure.
(40) and (30)