Chief Manufacturing NPT Threaded Coupler Accessory CMA-152 - Manual

I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8803-000053 Rev A
©2006 Chief Manufacturing
www.chiefmfg.com
02/06
BEFORE YOU BEGIN
1-1/2" NPT Threaded Coupler Accessory
Model: CMA-152
Specifications:
• Couples two 1-1/2" NPT threaded columns while
providing cable access.
• Intended for use with Chief CMA Series
accessories and RPA Series mounts.
NOTE: U.L. listed assemblies require the use of U.L.
listed components.
• Weight capacity of 500 lbs (227 kg).
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.