Chief Manufacturing CTA-100 - Manual (Page 4)

Installation Instructions CTA-100
4
TOOLS REQUIRED FOR
INSTALLATION
The tools required for installation are as follows:
• Allen Wrench (supplied)
NOTE: Other tools may be required depending on your
method of installation.
SHIPPING CONTENTS
BEFORE PROCEEDING: Unpack the carton.
Verify contents listed in Table 2.
Read installation instructions completely. If you are
missing any of the listed components, contact
Customer Service at: 1-800/582-6480.300.
Table 2. CTA-100 Parts List
ITEM DESCRIPTION QTY
10 Top Attachment Plate 1
20 Center Plate 2
30 Side Plate 2
40 Adjustment Plate 2
50 Foam Pad 2
60 M5 X 8mm Button Head Cap screw 20
70 Flat Washer 20
80 Allen Wrench 1
PARTS
Figure 1. CTA-100 Component Parts
70
60
10
40
20
50
30
80