Chief Manufacturing CTA-100 User Manual
Page 3
Installation Instructions
CTA-100
3
IMPORTANT WARNINGS and CAUTIONS!
WARNING
A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION
A CAUTION alerts you to the possibility of damage or destruction of equipment if you do
not follow the corresponding instructions.
WARNING
Improper installation can result in serious personal injury! Make sure that the
mounting surface can support a redundant weight factor five times the total weight of
the equipment: if not, reinforce the mounting surface structural members before
installing the mount.
WARNING
Be aware of the potential for personal injury or damage to the equipment if it is not
adequately mounted. Refer to the specifications described in Table 1, on page 2.
WARNING
The installer is responsible for verifying that the mounting surface to which the
mount is anchored will safely support the combined load of all attached components or
other equipment.
WARNING
The combined weight of the equipment placed on the CTA-100 must not exceed the
maximum support weight of the mount. Refer to the specifications described in Table 1,
on page 2.
WARNING
Watch for pinch points. Do not put your fingers between movable parts.
CAUTION
Check the unit for shipping damage before you begin the installation.
CONTENTS
CTA-100 SPECIFICATIONS...........................................2
TOOLS REQUIRED FOR INSTALLATION..................4
SHIPPING CONTENTS...................................................4
PARTS ..............................................................................4
INSTALLATION INSTRUCTIONS................................5
Assembling the Center Plates and Side Plates...............5
Attaching the Center Plates and Side Plates..................5
Installing Pads on Adjustment Plates ............................6
Installing Adjustment Plates..........................................6
Installing Top Attachment Plate....................................7
Connecting CTA-100 to TV/Mount ..............................7
Making Adjustments .....................................................8
Stacking Two Units .......................................................9
Stacking Three Units .....................................................9