Chief Manufacturing CTA-100 - Manual (Page 7)

Installation Instructions CTA-100
7
STEP 3
Figure 6. Install Top Attachment Plate
Figure 7. Connect CTA-100 to TV/Mount
Installing Top Attachment Plate
Install top attachment plate, as follows:
1. Locate the top attachment plate (10).
WARNING
Failure to install and tighten the screws
securing the top attachment plate can result in
personal injury and/or equipment damage.
2. Install four flat washers (70), four M5 X 8mm
button head cap screws (60), and the top
attachment plate (10) onto the bottom of the
TV/Monitor mount as shown in Figure 6.
Tighten the screws.
Connecting CTA-100 to TV/Mount
Connect the CTA-100 to the TV/Mount, as
follows:
1. Align CTA-100 with top attachment plate
(10) as shown in Figure 6.
2. Install four flat washers (70), four M5 X 8mm
button head cap screws (60) into the top
attachment plate (10). Tighten the screws.
See Figure 7.
(80)
(70)
(10)
(CTA-100)
(TV/Mount)