Crosman SAPP50 - Manual

Soft Air Electronic Pistol
(6 mm) Plastic BB
OWNER'S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS SOFT AIR GUN
Instructions in French included on reverse side.
Distributed by
Crosman Corporation
Routes 5 & 20,
P.O. Box 308
E. Bloomfield, NY 14443
www.crosman.com
1-800-7AIRGUN
SAPP50-515
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS BEFORE USING.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS SOFT AIR
GUN.
Please read this owner's manual completely. Remember to treat this soft air gun with the same
respect you would a firearm. Always carefully follow the safety instructions found in this
owner's manual and keep this manual in a safe place for future use.
THIS SOFT AIR GUN IS INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER.
WARNING:
This is not a toy. Adult supervision required. Misuse or careless use
may cause serious injury, particularly to the eye. May be dangerous up to 100 yards
(91.44 meters).
6. Maintaining Your Soft Air Gun
• DO NOT MODIFY OR ALTER YOUR SOFT AIR GUN. Attempts to modify the soft air gun in
any way inconsistent with this manual may make it unsafe to use, cause serious injury and
will void the warranty.
• If you drop your soft air gun, check to see that it works properly before you use it again. If
anything seems changed, like a shorter or weaker trigger pull, this may mean worn out or
broken parts. Call Customer Service at Crosman for assistance before using your soft
air gun again.
7. Reviewing Safety
• Do not ever point the soft air gun at any person. Do not ever point the soft air gun at any-
thing you do not intend to shoot.
• Always treat the soft air gun as though it is loaded and with the same respect you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the soft air gun pointed in a
SAFE DIRECTION.
• Always keep the soft air gun "On Safe" until you are ready to shoot in a SAFE DIRECTION.
• Always check to see if the soft air gun is "On Safe" and unloaded when getting it from another
person or from storage.
• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear shooting glasses to protect your eyes.
• If your reading or prescription glasses are not safety glasses, make sure you wear shooting
glasses over your regular glasses.
• Use .24 caliber (6 mm) plastic BBs only.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or
ricochet and hit someone or something you had not intended to hit. If the plastic BBs should
happen to hit a hard surface, do not reuse those plastic BBs because they could cause pos-
sible damage to your soft air gun.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe
should the backstop fail.
• Do not attempt to disassemble or tamper with your soft air gun. Call Customer Service at
Crosman Corporation for repair. Using unauthorized repair centers or modifying the function
for your airgun in any way may be unsafe and will void your warranty.
• Do not put the soft air gun away loaded. Make sure ALL of the plastic BBs are unloaded
from the soft air gun.
• Always store this soft air gun in a secure location.
SPECIFICATIONS
PERFORMANCE: Many factors can affect velocity, including brand of projectile, type of projectile
and barrel condition.
Mechanism/Action Electronic
Caliber/Ammunition 6mm plastic BBs
Magazine Up to 16 plastic BBs
Weight 9.28 oz. (.26 kg.)
Overall Length 8.5 in (21.59 cm)
Sights Front Blade
Rear Notch
Barrel Length 3.5 in (8.89 cm)
Barrel Material Smooth bore, aluminum
Safety Front Grip Safety
Velocity Up to 175 fps (53.53 m/s)
REPAIR SERVICE
If your soft air gun needs repair, we recommend that you call Crosman Corporation Customer service at
1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT
ATTEMPT TO DISASSEMBLE IT! Your soft air gun requires special tools and fixtures to repair it. If you
take it apart you probably will not be able to reassemble it correctly. Crosman assumes no warranty
responsibility under such circumstances.
LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against
defects in material and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman for defective product. Damages caused by abuse, modification or failure to
perform normal maintenance - see Step 6. Any other expense. CONSEQUENTIAL DAMAGES, INCIDEN-
TAL DAMAGES, OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of
sales receipt to product. Package and return to Crosman Corporation, Rts. 5 & 20, E. Bloomfield, NY 14443.
Canadian Customers: Follow packaging procedures above and send to Crosman Parts & Service
Depot, 611 Neal Drive, Peterborough, Ontario, K9J 6X7 Canada.
International Customers: Please return product to your nearest distributor. If you do not know your
distributor, please call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM
DATE OF RETAIL PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot
be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.
1. Learning the Parts of Your New Soft Air Gun.
Learning the names of the parts of your new soft air gun will help you to understand your owner's
manual. Use this manual to increase your enjoyment of this soft air gun.
2. Installing the batteries
• The Pulse P50 is run on 4 AAA batteries (not included).
• To install the batteries, locate the battery cover on the bottom of the grip frame.
• Slide the cover back and the cover will open down.
• Insert 4 AAA batteries as shown on the reverse side of the battery cover.
• Re-secure cover.
3. Operating the Safety
3.1 To Put the Soft Air Gun "ON SAFE":
• This soft air gun is always "ON SAFE", unless safety is pushed in while the trigger is pulled.
• The safety is located underneath the trigger guard, on the front of the grip frame. (Fig. 2)
Even when the safety is "On Safe", you should continue to handle
the soft air gun safely. Do not ever point the soft air gun at anything
you do not intend to shoot.
3.2 To take the Soft Air Gun "OFF SAFE":
• Locate the safety underneath the trigger guard, on the front
of the grip frame (Fig. 2).
• Press the safety into the grip frame to put the soft air gun “Off Safe”.
• You must continue to squeeze and hold the safety while pulling the trigger to fire.
4. Loading and Unloading Plastic BBs
4.1 Loading Plastic BBs
• Make sure the soft air gun is "On Safe" (See Step 3.1).
• Point the soft air gun in a SAFE DIRECTION.
• Pull down on the magazine from the bottom of the grip frame (fig. 3).
• Load plastic BBs (maximum capacity is 16 plastic BBs) into the magazine loading port (Fig. 4).
• Insert the loaded magazine back into the bottom of the grip frame until you hear a click, indicat-
ing that the magazine is locked securely into place Fig. 5).
WARNING:
Keep the soft air gun in the "ON SAFE" position until you are actu-
ally ready to shoot. Then push the safety to the "OFF SAFE" position.
Safety
Grip
Frame
Battery Cover
Trigger
Trigger Frame
Rear Sight
Barrel
Front Sight
Muzzle
Magazine
Slide
Muzzle
Plug
Fig. 1
Fig. 2
WARNING:
Use .24 caliber (6 mm) plastic BBs only in this soft air gun. Use of
any other ammunition can cause injury to you or damage to the soft air gun.
4.2 Unloading the Plastic BBs
• Make sure the soft air gun is "On Safe" (See Step 3.1), and
pointed in a SAFE DIRECTION.
• Pull down on the magazine from the bottom of the grip frame (fig. 3).
• Hold the magazine upside down with a container or your hand
around the loading port (Fig. 6).
• Press down on the plastic bbs in the slot on top of the magazine.
Note: Plastic bbs will unload rapidly, be ready to contain them.
• Before replacing the magazine, shake the soft air gun to release
any plastic bbs which may have fallen out of the magazine inside the soft air gun.
5. Aiming and Firing Safely
• You and others with you should always wear shooting glasses to protect your eyes.
• Always point your soft air gun in a SAFE DIRECTION.
• When you are sure of your target and backstop and the area around the target is clear, take
"Off Safe" (See Step 3.2) and remove muzzle plug.
• Squeeze and hold the safety in the "OFF SAFE" position.
• Aim the gun and pull the trigger. Note: The safety must be held down for the soft
air gun to fire.
• Your soft air gun is designed for target shooting and is suited
for both indoor and outdoor use. Always remember to place
your target carefully. THINK about what you will hit if you miss
the target.
• The soft air gun is correctly aimed when the front sight blade is
positioned exactly in the notch of the rear sight. The bulls-eye
should appear to rest on the top of the front sight. (Fig.7).
Fig. 7
Fig. 4 Fig. 5 Fig. 3
WARNING:
Never assume that because the soft air gun no longer fires a plastic
BB and/or the magazine is removed, that a plastic BB is not lodged in the barrel. Always
treat the soft air gun as though it is loaded and with the same respect you would a
firearm.
Fig. 6