F. select the following parameters – Comtrol DM Primo User Manual
Page 5
DeviceMaster Primo Hardware Installation
5
Serial Console Method
d.
Select the OK button. The Connect To dialog box appears.
e.
From the Connect using drop-down list box, select the COM port that you
are using. Select the OK button. The Properties dialog box appears.
f.
Select the following parameters:
g.
Select the OK button. The HyperTerminal main window appears.
h. At the Console terminal type command line, type 1 for ansi/vt100
parameter.
i.
Press the Enter key. HyperTerminal displays a configuration menu.
* Bits per second: 19200
* Data bits: 8
* Parity: None
* Stop bits: 1
* Flow Control: None