Comtrol RocketPort 550 uPCI Windows XP - Manual (Page 15)

15
Rocket Port Interface Box DB25 Signals
DB25 Pin RS232 Signal RS422 Signal
(RocketPort
RS232/422
version only)
Universal Interface
2 TxD *See note See UI manual
3 RxD *See note See UI manual
4 RTS *See note See UI manual
5 CTS *See note See UI manual
6 DSR *See note See UI manual
7 Signal Gnd *See note See UI manual
8 DCD *See note See UI manual
20 DTR *See note See UI manual
15 Not used RxD+ RxD(B) See UI manual
17 Not used RxD- RxD(A) See UI manual
19 Not used TxD+ TxD(B) See UI manual
25 Not used TxD- TxD(A) See UI manual
*Note : All RS232 signals are present in RS422 mode.
The RocketPort interface box can only be used with the RocketPort 550-8 and
RocketPort 550-16 controllers. These controllers have a single DB25F mounted on the
backplate which connects via the RocketPort cable to the interface box.
The Mini, Octa, RJ11 and RJ45 Rocket Port versions do not support RS422 mode.
BroadPort 550
Each port of the BroadPort 550 can be configurated to be BUS controller or Tributary
(SMPTE STANDARD 207M-1997). The user can select for each port the configuration
using 2 DIP switches.
The DIP switch S1 has 8 switches and control the ports 1-8.
The DIP switch S2 has 8 switches and controls the ports 9-15.
The next tables shows S1 S2
BroadPort 550 DIP SWITCH S1
DIP SWITCH S1 Function
switch 1 closed (open) Port 8 is BUS controller (Tributary)
switch 2 closed (open) Port 7 is BUS controller (Tributary)
switch 3 closed (open) Port 6 is BUS controller (Tributary)
switch 4 closed (open) Port 5 is BUS controller (Tributary)
switch 5 closed (open) Port 4 is BUS controller (Tributary)
switch 6 closed (open) Port 3 is BUS controller (Tributary)
switch 7 closed (open) Port 2 is BUS controller (Tributary)
switch 8 closed (open) Port 1 is BUS controller (Tributary)