Comtrol RM III V.90 - Manual (Page 2)

Hardware Installation 2
Before Installing the Hardware
Before Installing the Hardware
You should locate and unpackage the driver for your operating system before
installing the hardware. You may want to also review or print the software
installation and configuration document for the operating system.
Locating Software The following software is available for the RocketModem III. The hyperlinks will
take you to the root of the directory (CD or ftp site) that contains the software.
Optionally, you can locate all software using
http://support.comtrol.com/
download.asp .
• Diagnostic
Note: For information about creating a bootable diagnostic diskette, see Using
the Diagnostics on Page 6.
• Firmware Upgrade Utility:
-
Linux systems ftp://ftp.comtrol.com/RModem/Firmware_RM3/Install_Util/Linux
- Microsoft systems ftp://ftp.comtrol.com/RModem/Firmware_RM3/Install_Util/
Microsoft
Note: If these hyperlinks return with an error message, that means that a
firmware upgrade for V.92 has not been released at this time.
• Linux:
- Device driver
- LCOM Utility
• Windows XP:
- Device driver
- Test Utilities
• Windows 2000:
- Device driver
- Test Utilities
• Windows NT:
- Device driver with utilities
Locating
Documentation The following documents are available for the RocketModem III. The hyperlinks
will open the selected document. Optionally, you can locate all RocketModem III
documentation using
http://support.comtrol.com/download.asp .
• AT Command Set
• Linux:
- Installation document
- Using MiniCom
• Windows XP:
- Installation document
- RRAS Overview
• Windows 2000: Installation document
• Windows NT: Installation document