Pinouts for the rj45 interface module, Building rj45 loopback plugs – Comtrol RocketPort PCI series User Manual

Page 10

Text mode
Original mode

Pinouts for the RJ45 Interface Module

Pinouts for the RJ45
Interface Module

The following figures provide pinout information for the RJ45 plug and receptacle
for the RJ45 interface module.

Building RJ45
Loopback Plugs

Loopback connectors are plugs, with pins wired together as
shown, that are used in conjunction with the RocketPort
diagnostic software to test serial ports.

This RJ45 loopback is used with the Octacable and Rack
Mount interfaces. To build an RJ45 loopback plug, wire the
following pins together:

•

Pins 4 to 5

•

Pins 1 to 8

•

Pins 2 to 6 to 7