beautypg.com

Comtrol P60 User Manual

Page 4

background image

Installation

4

LED Indicators

The LEDs on the top indicate connections for TxD, RxD, DTR, DSR, RTS, CTS, and DCD. They are dim when there is not a signal.

TxD Indicator (signal from the local port)

Green:

connected but not transmitting data.

Orange: transmitting data from local to remote site.

RxD Indicator (signal from the remote port)

Green:

connected but not receiving data.

Orange: receiving data from the remote to local site.

DTR/RTS Indicators (signal from the local port)

Red:

connected and DTR (or RTS) signal is turned on.

Green:

connected and DTR (or RTS) signal is turned off.

DSR/CTS/DCD Indicators (signal from the remote port)

Red:

connected and DSR (or CTS/DCD) signal is turned on.

Green:

connected and DSR (or CTS/DCD) signal is turned off.

Self Test

This configuration is for a P60 self test. Run the terminal emulation program to see if what you typed is what you received.

In the previous image, all the signal lines could be either from the remote site RJ45 or the terminal block and shorted as shown.