Comfort Company Sit N Shape - Manual (Page 2)

Figure 4
Using the fastener, attach one yellow band to a D-ring on the assembly bar (Figure 1). Attach the
second yellow band to the second D-ring on the assembly bar.
While seated, wrap one wheelchair connection strap around a secure location on the side of the
wheelchair (see Possible Attachment Points). Connect the two D-rings of the wheelchair strap with
a fastener from the yellow band set (Figure 2).
1
2
Repeat step 2 on the opposite side of the wheelchair.
3
4
To adjust the length and resistance of the bands, simply roll the bar forward in your fingers to
the proper adjustment (Figure 3).
5
The Sit N’ Shape is now secure and ready to use.
Figure 2
Possible Attachment Points
Figure 1
Sit N’ Shape
WARNING: If using a wheelchair, LOCK both wheel breaks before beginning.
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
IS-SITNSHAPE
REV0413