Comfort Company Single Foot Elevating Legrest - Manual

COMFORT FOOT SINGLE ELEVATING LEG REST
PAD (FTSE & FTSTE)
Insert the shoulder bolt (A) into the washer
(B), mounting bracket (F) and thread
securely into the interlock cane clamp (C).
*NOTE: The various holes on the mounting bracket
(F) allow for varying foam height mounting.
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
1
Attach the interlock cane clamp to the leg
rest wheelchair tube. For 1” diameter
tubes, use the longer socket head cap
screws provided in the products kit bag.
2
3
Attach the mounting bracket (F) to the
foam pad assembly (G) using two of the
pan head screws (E). The third screw is
provided for aesthetic purposes.
*NOTE: The provided diagram shows the assembly
instructions for the left side leg rest.
IS-CFSINGLEELEVATINGLEGREST
REV0814
Parts Included:
1 - Single Elevating Leg Rest Assembly
3 - ¼ - 20 x ¾” Truss Pan Head Screws
1 - 5/32” Allen Wrench
1 - 3/16” Allen Wrench 1 - Clamp and Bracket Hardware Assembly
1 - 5/16” Shoulder Bolt
1 - Lock Washer
A
B
C
D
E
F
G