Comfort Company Molded Bolt On Foot - Manual

Drill two 5/16” diameter holes through the footplate of the
wheelchair as marked on the template.
Place template on the wheelchair footplate in the desired position.
1
2
Screw two ¼-20 x ¾” or ¼-20 x 5/8” or ¼-20 x 1” bolts
(depending on thickness of the footplate) with the provided
washers from the bottom of the footplate into the Molded Foot
Base.
3
MOLDED BOLT-ON FOOT
(part # 694-01)
Installation Instructions:
2 ¾”
IS-MOLDEDBOLTONFOOT
REV0413
Parts Included:
2 - ¼-20 x ¾” or ¼-20 x 5/8” or ¼-20 x 1” Screws
(dimensions vary depending on size of part)
2 - ¼ ” x 1 ¼ " OD Fender Washer