Comfort Company Embrace Moldable Insert - Manual (Page 2)

EMBRACE MOLDABLE INSERT
PARTS INCLUDED:
1 - Embrace Moldable Metal Insert
1 - Bending Tool
Modify the rear fingers of the insert using your hand or the provided bending tool.
A. Gentle Support - Slight bend in rear finger on a
Zero-Elevation Cushion.
1
B. Moderate Support- Medium bend in rear fingers on a
Zero-Elevation or Anti-thrust Cushion.
C. Aggressive Support- Aggressive bend in rear fingers on an
Anti-thrust or Anti-thrust Acta-Embrace Cushion.
Adjust the insert to address the patient’s side lean or tilted pelvis (Obliquity).
A. Mild Support- Give input to one or both sides.
2
Adjust the insert to address the patient’s rotated or windswept hips/legs.
A. Adjusted Support- Match the internal or external rotation of the
hips or legs. Match the elevation of one side of the pelvis, hip or
knee as needed.
3
B. Moderate Support- Give input at the hip or at the pelvis.
B. Very Aggressive Support- Capture the greater trochanters to
provide greater stability.
C. Aggressive Support- If the client has a fixed side lean, it is easy to
adjust the moldable insert to meet the pelvis. Provide input on the
low side of the pelvis to encourage movement towards
neutral posture.