Comfort Company 77103 Halo - Manual (Page 3)

SAFETY
PRECAUTIONS:
• Regularly check the Halo
device to identify areas of
possible entrapment, im-
mediately cease using the
bed until entrapment risk is
fixed.
• Regularly check to make
sure that there is no gap be-
tween the Halo Safety Ring
and the side of the mattress.
A gap could allow the user
to become wedged be-
tween the bed rail and the
mattress.
• Follow all assembly in-
structions carefully. Failure
to follow the instructions
could result in serious injury
to the user(s) of the product.
INSTRUCTIONS FOR USE
The Halo Safety Ring can be grasped by the resident to assist in bed mobility. This can help build strength,
increase independence, and help prevent skin breakdown.
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
1
In order to rotate the
Halo Safety Ring, pinch
the detent pins and
rotate the Halo Safety
Ring ninety degree
(90°) as shown below.
2
Detent pins must en-
gage with the holes
in Halo Safety Ring
bracket prior to use.
3
Always position the
Halo Safety Ring par-
allel with the bed
when in use and make
sure detent pins are
engaged.
Failure to return the Halo
Safety Ring to a parallel
position when the bed is in
use may cause entrapment
hazard.
- WARNING -
The Halo Safety Ring is
designed to rotate ninety
degrees (90°) to assist resi-
dents during transfers and
as a bed mobility device.
Follow the steps for safely
rotating the Halo Safety
Ring.
77103HALO_LIT034_082012 3 OF 3
HALO SAFETY RING
MODEL: 77103 - CARROLL BED MOUNT