CLEAR Spot 4G Users Guide - Manual (Page 6)

5
Set It Up (continued)
Connect your device to your CLEAR Spot
In order to identify your CLEAR Spot wi-fi network name (SSID) and network key (password), locate
the MAC ID, which can be found in two places – on the label on the CLEAR Spot battery cover and
under the battery. The MAC ID also might be referred to as MAC or Default Network. Make sure
you write the network name and password down, so that you can remember them.
With your laptop or device turned on, view the list of available wireless networks.
Select the “Clear Spot xxx” network – where “xxx” are the last three digits of the CLEAR Spot MAC
ID.
The default password is comprised of the last eight digits of the CLEAR Spot MAC ID. When
prompted, enter the password exactly as it appears, using lowercase letters. You should only need
to enter the password once – after it is entered the first time, it should be remembered automatically.
Your device will display a message indicating it has connected to your CLEAR Spot wi-fi network.
Connect to the Internet
The first time you connect to the internet, using your CLEAR Spot, you need to set up your CLEAR
online account, so you can view / pay your bill. We recommend using a laptop to connect to the
internet the first time.
Open a new browser and you’ll be directed to a webpage to view your rate plan information, complete
your CLEAR online account set-up and read / accept the CLEAR Terms of Service.
Congrats! You’re ready for INTERNET AWESOMENESS!