CLEAR Spot 4G Users Guide - Manual (Page 19)

18
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Tools / Admin
This Tools / Admin Tab displays tools such as Time Server and Time Zone settings. You can also
change the Administrative Password, which is factory default to “admin.”
Changing the Administrator Password:
 New Password: Enter the new CLEAR Spot Administrator Password.
 Reenter Password: Enter the new CLEAR Spot Administrator Password again, to verify it is
correct.
 Save Settings: Click “Save Settings” for the new Administrator Password to take effect.
Save Device Configuration:
 Click “Save Device Configuration to File” to restore a configuration from a previously saved
configuration file.
If you’re using your CLEAR Spot and are
connected to the internet, click here to
open the CLEAR Spot Home Page.
Internet Based Time Server (NTP)
Setting:
 Enable NTP: Enabling this feature
allows the CLEAR Spot to get current
time information from the time server
on the network.
 Daylight Saving Time: Enabling this
feature means the time automatically
will change when Daylight Saving Time
goes into / out of effect.
 NTP Service: The CLEAR Spot
comes with a default setting of
(time.windows.com) for the time server.
If this time server is not working,
please try one of the following
alternatives: time.nist.gov, time-
nw.nist.gov, time-a.nist.gov or time-
b.nist.gov.
 Time Zone: Select the time you are in.
 Save Settings: Click “Save Settings”
to apply the new settings.