Clear, Ools, Pgrade – CLEAR Spot 4G Users Guide User Manual
Page 20: Manage your clear spot (continued)
19
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Tools / Upgrade
The Tools / Upgrade Tab can be used to reset the CLEAR Spot to the default factory settings. If for
any reason, you forgot your CLEAR Spot wi-fi network name and password, you can reset them by
clicking “Restore to Factory Settings”.
It is important to note that many device settings will be reset to the factory default settings. The
Administrative Username and Password will be reset to “admin”. The CLEAR Spot wi-fi network
name and password also will be reset. The default CLEAR Spot wi-fi network name is “Clear Spot
xxx” network – where “xxx” are the last three digits of the CLEAR Spot MAC ID, which can be found
in two places – on the label on the back of the CLEAR Spot and under the battery. The MAC ID also
might be referred to as MAC or Default Network. The password is comprised of the last eight digits
of the CLEAR Spot MAC ID. Make sure you write these digits down so you can remember them.
Note: You also can reset the CLEAR Spot setting to the factory default settings by pressing a button
on the CLEAR Spot. Instructions are in the Online User Guide, in the Quick Tips / Resetting your
Username and Password section. Or, click
Updating the firmware helps to keep the CLEAR Spot performing optimally and may add features and
functionality. When new firmware versions are available, they automatically are pushed to the
CLEAR Spot. However, if you desire to check the firmware version and manually update it, this is
where you can.
If you’re using your CLEAR Spot and are
connected to the internet, click
to
open the CLEAR Spot Home Page.