Chrysler 2008 Aspen User Manual

Page 189

Text mode
Original mode

Reconfiguring Power Outlets
To reconfigure the outlets, be sure the ignition is OFF
before removing the fuse. The reconfigurable fuse loca-
tion is a special design that allows the fuse to be installed
in two different ways. If the fuse is located in the

ЉUpper

or Top Position

Љ the outlets will work at all times. If the

fuse is located in the

ЉLower or Bottom PositionЉ the

power outlets will only work when the ignition is ON.

NOTE:

The fuse block is located in the left side kick

panel behind a removable cover near the park brake
pedal. A fuse puller is attached to the inside surface of the
fuse panel cover to aid in removing fuses, if necessary.

188

UNDERSTANDING THE FEATURES OF YOUR VEHICLE