Menu no. 3, Adjusting print position for label, Menu no – Toshiba TEC EMl-31015D User Manual
Page 56: Menu no. 3 • adjusting print position for label, Procedure, Unit total price p, Standard value, Standard va, Ue standard value
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM1-31015D
• Adjusting Print Position for Label
When a printed data position deviates from the normal position in the forward or backward direction
along the label feed direction, adjust the print position using the following procedure.
Procedure
(Select another menu or mode.)
WEIGHT
UNIT TOTAL
PRICE
p
3
P3 LI
100
P3 LI
110
1 gradation = 1 dot = 0.154mm
P3 L2
P3 L2
5
fJ
Standard value
1 gradation = 3 dots = 0.462mm
P3 L3
P3 L3
1 gradation = 3 dots = 0.462mm
5
U
Standard va
P3 LI
110
ue
Standard value
NOTE: When the print position for a commodity name is lowered or raised, the print position for the
address is also lowered or raised. After adjusting the print position for the commodity name,
make sure to confirm the print position of the address.
53-