Level adjustment, Cleaning the print head – Toshiba TEC EMl-31015D User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMI-31015D
Set the scale on a stable and level surface. Level
the scale by turning the adjustable legs so that the
air bubble is inside the center circle.
If the print head is dirty, clear printing will not be produced. It is recommended to clean the head
with thermal head cleaner everyday before starting operation using the following procedure:
1. Remove the printer cover and label cassette.
Then push the head-up lever in the direction
indicated by the allow.
Head-up Lever
2. Wipe off the dirt on the blackened portion in
the figure to the right with the thermal head
cleaner.
Then set the label cassette, and push down the
print head.
NOTE:
Be careful not to damage the print head
when cleaning.
Head
Thermal Head Cleaner
- 15 -