9 calling and printing a grade line, Price – Toshiba TEC EMl-31015D User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM1-31015D
13.9 CALLING AND PRINTING A GRADE LINE
Control lock :
REG, M.DOWN, or REWRAP
Mode SW (2) : WEIGH, BY COUNT, or FIX
A required Grade Line of those programmed (maximum 49 Grade Lines) can be call and printed on
the label to be issued, for the purpose of adding a short message to the commodity name.
Step
No,
Procedure
WElGl 11
UNIT
PRICE
TOTAL
PRICE
N
E
T
P
R
A
c
1
N
L
f
..fe._
E
ft
R
0
R
A
C
■iCo:::
iisitSSS
E
M
s
1
Enter the PLU#109.
0.00
P
000109
2
Depress the PLU key.
--------. - -
P 3
1.00
3
Depress the G.Line key.
GL1 E
4
Enter the required Grade Line #3
(Max.49)
GLI E
3
5
Depress the PRINT key.
----- ...
P 3
1.00
NOTES ; 1. The Grade Line
#
to be called in this operation must be one of those programmed
beforehand. If a Grade Line # of no programmed data is entered, a “DATA ENTRY
ERROR” will result on the following [PRT/*] key depression.
2.
When a Grade Line Entry is operated after a PLU Entry as in the example above, the
Grade Line content is not displayed in the Messasge Window but is printed on the label.
On the contrary, when a Grade Line Entry is operated before a PLU Entry, the Grade
Line content is displayed in the Message Window but is not printed.
3.
The Grade Line print position (above or below the Commodity Name line) is determined
by Initial Setting.
4. The maximum number of grade line characters is 26.
30