Toshiba MA-1190 - Manual (Page 16)

0/FOR
AT-FOR (QUAMTITY EXTENSION AND SPLIT-PACKAGE PRICING) KEY ([(»/FOR])
This key is used to multiply a department or PLU item entry by a
quantity (Multiplication Function). This key is also used to
auto-calculate and enter a split-package price (in such a case as a
customer wants only two of five tomatoes in one package) (Split Price
Function).
The basic order of mutliplcation is:
I QUANTITY I -> [@/FOR] -> |UNIT PRICE |
The quantity can be a maximum of 3 integarl digits and 3 decimal
digits. The price can be a maximum of 6 digiths. The product must
not exceed 8 digits.
As for details of multiplication and split pricing for various cases,
refer to the "REGISTERING PROCEDURE FOR SALES" section.
Usually, the fraction below the least effective digit will be rounded
off. However, it may be programmed to be rounded up or discarded by a
program option.
PLU (Price-Look-Up) KEY ([PLU])
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be a preset PLU (to allow the preset price
only) or an open PLU (to allow a price entry through the numeric keys
each time).
TO ENTER THROUGH PRESET PLU:
PLU Cod^ [PLU]
1 to 4 digits;
(1 to 99999999)
The preset price will automatically be
read and entered.
To repeat the same PLU price, depress the
[PLU] key only, after the above operation.
TO ENTER THROUGH OPEN PLU:
I PLU Code! [PLU]
1 to 4 digits;
(1 to 99999999)
I PRICE [AMT]
.., The price indexed through the numeric keys
will be entered.
To repeat the same PLU price, depress the
[AMT] key only, after the above operation.
As for quantity extension and split pricing involving PLUs, refer to
the "REGISTERING PROCEDURE FOR SALES" section.
Each PLU is programmed with a max. 8-digit PLU Code, a 2-digit linked
Department Code, a max. 6-digit Preset Price or Open Price Status, SI,
Tax, Food Stamp, Scale, Stock, Trade Stamp statuses, and PLU Link
Table No.(if required).
- 12 -