Toshiba TEC MA-206 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11002
12. PAPER ROLL REPLACEMENT AND OTHER
MAINTENANCE OPERATIONS
Fig. 2
Fig.3
INSTALLING THE RECEIPT PAPER
1.
Turn the Mode Lock to the “REG” position.
2.
Remove
the
Paper
Cover,
and
remove
the
Journal Winding Reel. {Fig. 1)
3.
Hold a new paper in the direction as shown in
Fig. 2 so that the paper end will be fed from the
bottom.
4.
Fold the paper end firmly as shown in Fig. 3 to
ease the insertion.
5.
Place the paper roll in the outer-side holder of
the two roll holders. (Fig. 4)
6.
Insert the paper end into the Receipt Inlet, feed
the paper in while pressing down the [RF] key.
(Fig. 5)
7.
When all the folded portion comes out, tear off
the unnecessary part with attached cutting edge.
(Fig. 6)
8.
Go on to INSTALLING THE JOURNAL PAPER
steps if necessary, or go on to Step 9 below if
not.
9.
Attach the Paper Cover.
10.
Depress the
[NS]
key to issue a receipt to check
if the paper has properly been set.
Fig. 5
- 6 8 -