Mode lock and clerk locks, 1 mode lock, 2 clerk locks (option) – Toshiba TEC MA-206 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11002
4. MODE LOCK AND CLERK LOCKS
)
4-1 MODE LOCK
)
(POSITION)
SET
SET?”
Key ^
t t
REG
Key
MA
Key
OFF
REG
(FUNCTION)
In this position, the register will allow
programming operations.
The register operations are locked when the
Mode Lock is in this position.
Normal cash register operations are carried
out in this mode. However the operations
requiring a Manager Intervention cannot be
performed in this mode.
The sale totals in memory can be read and
the programmed data can be verified in this
position.
All the resettable totals and their respective
counters in memory will be read and reset in
this position.
REG Key:
The REG Key is used by the cashier or clerk who operates the
register. This key can access the positions of
OFF
and
REG.
MA Key:
jhe MA Key is used by the store manager who will daily supervise
the collection of money and the printout of transactions recorded
by the register. This key can access the positions of
OFF, REG,
X,
and
Z.
SET Key:
The SET Key is used by the programmer. This key can access
the positions of
OFF
and
SET.
The keys may be inserted or pulled out at the
“OFF”
or
“REG”
position.
4-2 CLERK LOCKS (OPTION)
Push-key Type
1
2
3
4
Each clerk is assigned his/her own clerk key (1 to 4).
The register will not operate unless one of these keys is
pushed down.
-
3
-