Toshiba TEC DRJST-51 - Manual (Page 6)

E01-13010
DRJSnr-51 SERIES
1. INTRODUCTION
Thank you for purchasing the TEC DRJST-51 Receipt/Joumal Printer. This printer is a high-speed dot
matrix printer. The interface complies with the 8-bit parallel interface (conforming to Centronics
interface) or Serial interface (conforming to RS-232C), which enables connection with various devices.
This printer contains three stations; receipt, journal and slip. Up to 40 digits can be printed on the
receipt and journal, and up to 88 digits on the slip for the 58-mm wide; And up to 24 digits can be printed
on the receipt and journal, and up to 55 digits on the slip for the 45-mm wide.
This manual describes the functions and handling of this Printer and should be read carefully to help
gain maximum performance and life from your Printer. For most queries please refer to this manual
and keep it safe for future reference.
1.1 Applicable Model
• DRJST-51 SERIES
Model name description
DRJST-51D
'------------- Destination
QM: English Standard
TW: Taiwan
--------- Cable Specification
Blank: Power supply Cable only
1: Power supply Cable and 1/F Cable
_ l/F Specification
P; Parallel l/F
S: Serial l/F
____ Option
Blank: without Paper Cover Lock, Full Cut,
Single Validation
1: with Paper Cover Lock, Full Cut,
Single Validation
2: without Paper Cover Lock, Full & Stub Cut,
Single Validation
3: with Paper Cover Lock, Full & Stub Cut,
Single Validation
4: without Paper Cover Lock, Full Cut,
Multi-validation
5: with Paper Cover Lock, Full Cut,
Multi-validation
6: without Paper Cover Lock, Full & Stub Cut,
Multi-validation
7: with paper Cover Lock, Full & Stub Cut,
Multi-validation
Paper Width
Blank: 58mm
A: 45mm
- 1 -