Toshiba TEC DRJST-51 - Manual (Page 17)

E01-13010
DRJST-51 SERIES
• Replenishing the ink to the store name/message stamp
When the store name/message stamp, if installed, printing appears too dim, replenish the ink in the
following procedure.
1) Remove the paper cover. (Refer to the
"Remove the paper cover".)
2) Remove the store name/message stamp
by pulling it in the figure. (Fig. 1)
3) Apply ink only two or three drops.
Stamp may not print dark immediately.
Allow time for ink to saturate the stamp.
{Fig. 2)
4) Install the stamp by inserting it in the
direction of the arrow mark as it clicks.
(Fig-3)
- 1 2 -