Camera recording – RCA 390 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Camera Recording

In addition to the camera itself, you will need a Camera

AC Power Supply (RCA Model CPS03 for use with RCA
cameras). Plug the camera cable into the power supply
and then connect the cables from the power supply to the
VCR as the drawing shows. The connections from the
VCR to your TV are the same ones you normally use.

To start recording press PLAY ana RECORD on the VCR.
Use the PAUSE button on the VCR to start and stop
recording. If you want to pause for more than three or
four minutes, stop the VCR by pressing STOP. When

you are ready to resume, press both PLAVand RECORD.

TURN ON TV.