Tv monitor/receiver connections, J-direct video and audio connections, Operating instructions – RCA 390 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Monitor/Receiver Connections
j-Direct Video and Audio Connections——-----------------------
Connecting the video output and audio output jacks of
your VCR to the corresponding video and audio input
jacks of your TV monitor/receiver may produce a slightly
better picture during playback. These "direct" signal con
nections bypass the TV tuner during playback, thus
reducing the probability of “noise” and other "extra" sig
nals that may degrade picture quality.
FROM HOME VHF ANTENNA
OR CABLE-TV
SYSTEM
TYPICAL
MONITER/
RECEIVER
INPUTS
AH020*
SIGNAL
SPLITTER
TO VHF
ANTENNA
CONNECTIONS
ON TV
UHF
FROM HOME
ANTENNA SYSTEM
(USED ONLY IF YOU
HAVE HOME UHF ANTENNA)
Operating Instructions:
• For normal VHF or cable-TV viewing independent of
VCR, place TV Monitor/Receiver in TUNER operational
mode and select channels with TV Monitor/Receiver
tuner.
• For viewing of channel being recorded, place TV Moni-
tor/Receiver in VIDEO INPUT operational mode. Use
VCR tuner to select channel.
TO UHF ANTENNA
CONNECTIONS ON TV
(USED ONLY IF YOU
HAVE HOME UHF ANTENNA)
•Optional accessory available (rom your RCA dealer
For recording one channel while viewing another, place
TV Monitor/Receiver in TUNER operational mode. Use
VCR tuner to select channel to be recorded. Use TV
Monitor/Receiver tuner to select channel to be viewed.
For playback of recorded program, place TV Monitor/
Receiver in VIDEO INPUT operational mode.