Toshiba KV-6200A - Manual (Page 5)

® HOUR METER button
The time that the equipment has been used is displayed in
the counter display.
When this button is pressed, the total usage time is
displayed for five seconds. Next, ttie usage time since the
last maintenance is displayed for five seconds. Following
this, the display returns to the counter display.
Total time: Max. 9999 hours x 10 (99990)
(approximate value)
Time since the last maintenance:
Max. 999 hours x 10 (9990)
(approximate value)
The time display is useful for maintenance and checks.
® DISPLAY button
Press to display a menu on the screen. Use this button
when you wish to change.
® SHIFT button
Used to set a mode and times on the menu screen.
® SET button
Used to make settings on the menu screen or set times.
Press either the + or the - button and adjust to the
numerical value or item that you want to set.
€> COUNT, button
Press to display the tape counter or tiie alarm counter on
the VCR DISPLAY.
® COUNT. MEMORY button
• Press once to appear the "COUNT. M" (counter memory)
on the VCR display. When the tape is fast-forwarded or
rewound during this mode, tiie-tape will stop at a count of
" 0000 ".
• Press twice to appear the "ALARM M" (alarm memory)
on the VCR display. When the tape is fast-forwarded or
rewound during this mode, the tape will stop automati­
cally at the beginning of an alarm and this VCR enters
the STILL, PLAYBACK mode.
• Press three times to cancel this function.
® RESET buttjpn
• Press to reset the tape counter to "0000" during the tape
counter mode.
• Press to reset the alarm counter to "A-00" during the
alarm counter mode.
® TAPE REMAIN button
As long as this button is depressed, the remaining tape
time is displayed in the counter display. The remaining
time is the approximate time to tape end when used in the
A2-hour mode,
® TRACKING buttons ( v / a
)
Adjust to eliminate noise from your picture during play­
back.
® TIME MODE buttons ( V / A )
Used to set ttia recording and playback time modes.
Press either the a button or v button and adjust for the
time mode you wish to set.
® MODE LOCK switch
OFF: Used for normal operation.
ON: Operations buttons will not operate.
® VCR DISPLAY
® CASSETTE COMPARTMENT
When a cassette is inserted into the cassette compart­
ment, the mechanism will automatic^ly load the tape Into
this VCR.