How to set, Gbgg, G b g g – Toshiba KV-6200A User Manual
Page 32: 0 ^ g ! j, О 0 0 р | р
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operations that will be made after tape reaches its end can be selected as follows.
How to Set
Press the DISPLAY
button.
OBW
SHFT
IttAttN S
-S£T +
^ G B G G
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ENO-tOISPLAY]
Press the or ►
SHIFT button to make
SETUP blink and press
the -I- SET button.
¡»MAY SHFT
UOttOlS&ECr
-SCT +
□ 0 ^ G ! J
CLOCK ADJUST
I SETUP I
DISPLAY MODE
PROGRAM
EN0-[01 SPLAY]
Press the
-1
or »•
SHIFT button to make
TAPE END MODE blink.
OtiRAY SHFT
-ЖТ+
□ G G
ALARM REC TIME
ISS
SPEED
A 2H
ISHOT REC FIELD
IF
INTERVAL 0.2S
RESTART REC
OFF
TAPE END MODE
I
stop
I
ALARM
STOP
MENU-[DISPLAY]
Press the + or - SET
button to set the opera
tion after detection of
tape end.
OCPIAY ЗНГГ
lOOtTOhSElfCr
О 0 0 Р | Р
ALARM REC TIME
15S
SPEED A 2tt
ISHOT REC FIELD
IF
INTERVAL 0.2S
RESTART REC
OFF
TAPE END MODE
ISTOPI
ALARM
STOP
MENU-t01SPLAY]
Each time pressing the + SET button, the display changes
as follows.
STOP (REW STOP) (REW -> REC)
t___________________________ I
Each time pressing the - SET button, the display changes
in the reverse order.
Display
Operation after detection of tape end
STOP
Stops at tape end.
REW STOP
Rewinds to beginning of tape and stops.
REW REC
Set to carry out repeat recording.
Rewinds to beginning of tape and records.
Note:'
The^uzzer, screen display and counter displays operate as follows depending on the setting for operations after detection of
the tape end.
Setting contents
Buzzer
Screen display
Counter display
STOP
Buzzer sounds at tape end
TAPE END blinks
Counter display blinks
REW ^ STOP
Buzzer sounds at tape end
TAPE END blinks
Counter display blinks
REW ^ REC
_____------
_____----------
31