Kenwood DPC-41 - Manual (Page 13)

(3§ Push the P. MODE button.
(It means that the music has been set as the firstly played music.)
O Select the music (from Musics 2, 3, ... 15):
• Repeat the operation in (15) and (S).
• The maximum number of input musics for program is 15. The following indication is shown
after those 15 musics are input.
C> II I
ru u u
During the programmed play, the unit is in the auto space mode. Then, the four-second pause
is inserted between the musics.
If the SKIP [ ►W ] button is pressed during the programmed play, skip search can be made
only with the programmed track.
When the program is called during the program stand-by mode and the PLAY/PAUSE [►/||]
button is pressed with LAST MEMO. OFF (See Page 14), the player will play from the first
music programmed, not the music whose number is indicated now.
Confirmation of the programmed contents
This function can be operated when the disc is programmed and stopped,
i) Push P. MODE button:
• Indicates the music number of Music 1.
O H p - a
Track programmed Memory No.
IT^ If the P. MODE button is pressed repeatedly:
• Then the programmed contents are indicated in order.
•
if the music orders are indicated until the last programmed music, the indication returns
to Music 1.
■ How to cancel all the programs
go) Put the unit to POWER OFF or open the lid:
• Push the STOP [ ■ ] button once when the musics are is programmed and the disc is
stopped in order to enter the unit into the standby mode, or press the STOP [ ■ ] button
twice during play in order to put the unit to POWER OFF.
• Push the OPEN button.
■ How to change the contents of the program
(21) Call the program number to be changed by pressing the P. MODE button:
Example:
When you wish to change the music in Track 6 of the Program Number 2 to Track 8, call
the Program Number 2 by pressing the P. MODE button.
O B P - S B O B P - ^ P
You can also revise the track after indicating the Track 8 with
the main unit, and then pressing the P. MODE button.
l and I buttons on
DPC-41
13