H5-96, Hold, On, play/pause – Kenwood DPC-41 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ To stop
[8] Push the STOP [■] button:
• If the STOP [ ■ ] button is pressed once, the unit is put in the standby mode. If it is pressed
once again, the unit is turned out to be POWER OFF.
• If the standby mode lasts for 3 minutes or more, the unit Is turned out to be POWER OFF.
Track Min. : Sec.
STANDBY
I H
H5-96
Total number of tracks
Total playing time
Notes:--------------------------------------------------------------------------------------------------------------
•
If
the
HOLD
switch is being turned
ON, PLAY/PAUSE
[►/!!] operation cannot be activated
even the button is pressed.
• If OPEN button Is pressed, all the contents Is erased and the unit is turned out to be POWER OFF.
• If the lid is open, all the functions do not work. Closing the lid does not simply allow the unit
to turn out to be POWER ON.
• If the PLAY/PAUSE [►/!! ] button is pressed during the standby mode, the unit starts playing
from the first track.
• When the music is played until the final track and the player has naturally entered the Stand
by Mode, it indicates the total playing time.
,
• Be sure not insert the disk up side down. If the disk is inserted into the unit with reverse side
up, the unit can not start playing.
• Do not insert anything other than the disk into the disk tray.
• A disk may be damaged if it is inserted diagonally into the disk tray.
■ To skip to the beginning of desired track (Skip feature,
to
search in the forward or backward direction (Search feature, ►>!)
• The skip function is activated with one press of button and the search function is activated
with continuous press of button.
• Operate during play (Basic Operations (T), (T)), or standby mode (Basic Operation [8)).
(^To skip to the beginning of the track being played:
Tap the button for an instant.
To skip to the beginning of the next track:
Tap the ►N button for an instant.
• When you wish to skip back to the previous music, press the button once more.
• The first music is caused to play if button is pressed while the last music is being played.
• If you press button during the standby mode, the last music is activated to play.
Qg How to operate the quick return with the main unit:
Push
button continuously.
How to operate the quick traverse:
Push
button continuously.
• If you release the quick return and quick traverse buttons, the unit plays the music from
that position.
• If an operation is made during the pause mode, the music is paused at the position where
the button is released.
DPC-41 11