Operation of remote control unit loading batteries, Playback of mini disc, Remove the cover – Kenwood DM-VH7 User Manual
Page 9: Insert batteries, Close the cover, Playing tracks in order from track no. 1, Turn the unit on, Operation, Start playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of remote control unit
Loading batteries
Playback of Mini Disc
Use the following procedure to play a MD in the
original order of tracks from track No. 1.
Remove the cover.
Insert batteries.
Close the cover
' Insert two R6 ("AA"-size) batteries
following the polarity indications.
Playing tracks in order from track No. 1
Turn the unit ON.
Operation
The unit can be turned on by plugging the power
cord into a power outlet and pressing the "on/
standby (POWER (I /(!)))" key of the remote con
trol unit. Aftertheunit has been turned on.press the
desired operation key.
• When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between pressing of keys.
In case no disc Is loaded:
Load a Mini Disc.
6 m
Reference operating range
In the direction of the arrow.
• Insert the minIdIsc correctly Into the slot of this unit,
• The disc indicator lights up when an MD is inserted.
• "READING" is displayed while the contents of the MD
are checked.
• If a title has been assigned to the disc, that title will be
displayed.
Start playback.
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace all batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Track No. being played
I__________________
Elapsed time of track
being played