Using a car battery charger (sold separately) – Canon CDI-E151-010 User Manual
Page 152
150
Appendix
Using a Car Battery Charger (Sold Separately)
Car Battery Charger CBC-NB2 (sold
separately) can be used to charge battery
packs from an automobile's cigarette lighter
socket.
Always ensure that the automobile’s engine is
running when you use the car battery charger.
Use of it with the engine off may flatten the
battery in some automobiles. Always unplug
the car battery charger before turning off the
engine.
1
With the engine
running, plug the car
battery cable into the
cigarette lighter
socket and the
battery charger.
2
Insert the battery
pack all the way into
the battery charger
as shown.
To the cigarette
lighter socket
Charge Indicator
z Align the arrow on the battery pack and the
arrow on the battery charger to correctly insert
the battery pack in the charger.
z The charge indicator will light red while the
battery pack is charging. It will change to green
when the charge is complete.
z After charging, unplug the car battery cable
from the cigarette lighter socket and remove the
battery pack.
zThe battery will stop charging whenever you
turn the engine off, so be sure to unplug the
car battery cable from the cigarette lighter
socket.
zWait until the engine is running again to plug
the car battery cable into the cigarette lighter
socket.
zThe car battery charger can only be used in a
negative ground car. It cannot be used in a
positive ground car.