Canon CDI-E151-010 - Manual (Page 139)

Appendix 137
Appendix List of Messages
The following messages may appear on the LCD monitor.
z For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
Busy... Image is being recorded to, or read from, CF card.
Resetting all the camera and menu settings to default
No memory card You turned on the power without a CF card installed.
Cannot record! You attempted to shoot an image without a CF card installed.
Memory card error! CF card has experienced an anomaly.
Memory card full CF card is too full to accommodate more images, image settings (such as slide shows or print settings) or
sound memos.
Naming error! The file could not be created because there is a file with the same name as the directory that the camera is
attempting to create, or the highest possible file number has already been reached. In the Set up menu,
please set [File No. Reset] to [On]. After you save all the images you wish to retain onto a computer,
format the CF card (p. 19). Please note that formatting will erase all the existing images and other data.
Change the battery pack. Battery charge is insufficient to operate the camera. Replace it immediately with a charged battery pack or
recharge it.
No image No images recorded on CF card.
Image too large You attempted to play back an image larger than 4064 x 3048 pixels.
Incompatible JPEG format You attempted to play back an incompatible JPEG file.
Corrupted data You attempted to play back an image with corrupted data.
RAW You attempted to play back a RAW image in an incompatible format.
Cannot magnify! You attempted to magnify a movie or an image that was photographed with another camera, recorded in a
different format, or edited on a computer.